乙烯工业 ›› 2020, Vol. 32 ›› Issue (4): 43-47.

• 工业技术 • 上一篇    下一篇

乙烯装置CO2含量高原因分析及对策

王景昭,汤佳香   

  1. 中国石油化工有限股份公司广州分公司,广东 广州 510000
  • 收稿日期:2020-01-15 修回日期:2020-07-26 出版日期:2020-12-25 发布日期:2020-01-04
  • 作者简介:王景昭,男,2004年毕业于华南理工大学化学工程与工艺专业,主要从事乙烯裂解生产管理工作,工程师。

Cause Analysis and Countermeasures for High CO2 Content in Ethylene Plant

Wang Jingzhao, Tang Jiaxiang   

  1. SINOPEC Guangzhou Company, Guangzhou, Guangdong, P.C.510000
  • Received:2020-01-15 Revised:2020-07-26 Online:2020-12-25 Published:2020-01-04

摘要:

对广州石化乙烯装置CO2含量高的问题进行研究分析,确认裂解原料石脑油钠含量高是造成CO2含量高的原因。同时石脑油钠含量高对乙烯装置可造成裂解炉炉管运行周期短、碱洗系统CO2出现穿透等问题,提出了控制原料质量、对裂解炉管烧焦期间增加水洗浸泡及碱洗塔优化等调整措施,保证了乙烯装置的安全稳定运行。

关键词: 乙烯装置 ,  , 石脑油 ,  , 钠盐 ,  , 二氧化碳

Abstract:

This article analyzes the causes of high CO2 content in the ethylene plant of SINOPEC Guangzhou Company. It is concluded that the high sodium content of the naphtha used as cracking raw material is the reason for the high CO2 content. At the same time, the high sodium content of naphtha may cause problems such as short operation cycle of furnace tube and CO2 penetration of caustic wash system. Some adjustment measures are proposed including the quality control of raw materials, the scrubbing and soaking during the coke burning of furnace tubes and the optimization of caustic wash tower, so as to ensure the safe and stable operation of the ethylene plant.

Key words: ethylene plant, naphtha, sodium salt, carbon dioxide/CO2