裂解气压缩机结焦危害与分析

乙烯工业 ›› 2022, Vol. 34 ›› Issue (3): 36-38.

裂解气压缩机结焦危害与分析

李云龙，周磊，刘嘉

中国石油天然气股份有限公司吉林石化分公司，吉林吉林 132021

收稿日期:2021-09-30 修回日期:2022-03-25 出版日期:2022-09-25 发布日期:2022-09-20
作者简介:李云龙，男，1994年毕业于吉林工学院化学工艺专业，现任安全环保处处长，高级工程师。

Harm and Analysis of Coking in Cracking Gas Compressor

Li Yunlong, Zhou Lei, Liu Jia

PetroChina Jilin Petrochemical Company, Jilin, Jilin, P.C.132021

Received:2021-09-30 Revised:2022-03-25 Online:2022-09-25 Published:2022-09-20

摘要/Abstract

摘要：

吉林石化公司150 kt/a乙烯装置受原料结构变化影响，造成裂解气压缩机N因子增长，排出管道和机腔内结焦，二段排出压力升高及裂解气压缩机转速和振动值超标等问题。通过注入分散型阻垢剂，维持一段时间的运行，但随着结焦问题的恶化，装置被迫停车检修。通过研究聚合机理，优化裂解原料和控制压缩机段间温度是防止聚合的关键。

关键词: 裂解气压缩机 , 结焦 , 裂解原料

Abstract:

Affected by the changes in raw material structure, the 150 kt/a ethylene plant at PetroChina Jilin Petrochemical Company had problems such as N factor increase of cracking gas compressor, coking in discharge line and cavity, increased discharge pressure at the second stage and over high speed and vibration of cracking gas compressor. By injecting dispersed scale inhibitor, the operation could be maintained for a period of time. However, with the worsening of coking, the unit was forced to be shut down for maintenance. By studying the polymerization mechanism, this paper puts forward that the optimization of cracking raw materials and the control of compressor inter-stage temperature are the key to prevent polymerization.

Key words: cracking gas compressor, coking, cracking raw material

李云龙, 周磊, 刘嘉.

裂解气压缩机结焦危害与分析 [J]. 乙烯工业, 2022, 34(3): 36-38.

Li Yunlong, Zhou Lei, Liu Jia. Harm and Analysis of Coking in Cracking Gas Compressor[J]. Ethylene Industry, 2022, 34(3): 36-38.

[1]	崔乃云, 邓玮, 许建雄, 陈华. 裂解气压缩机段间换热器结垢处理[J]. 乙烯工业, 2022, 34(3): 45-48.
[2]	邹铖, 肖佳宇, 林国荣. 石脑油重质化对乙烯装置的影响分析 [J]. 乙烯工业, 2022, 34(1): 12-16.
[3]	刘洋, 潘伟, 董祥明. 裂解气压缩机透平单试及过程中异常情况处理[J]. 乙烯工业, 2022, 34(1): 54-58.
[4]	吴伟, 张迪, 刘晓晖, 王青军. 裂解气压缩机高压缸机械密封失效原因分析[J]. 乙烯工业, 2021, 33(3): 46-48.
[5]	赵莹. 乙烯装置大检修裂解气压缩机停车控制[J]. 乙烯工业, 2021, 33(3): 54-57.
[6]	刘洋, 宋继强, 潘伟. 离心式压缩机油管路油运过程中的问题分析及对策[J]. 乙烯工业, 2021, 33(2): 47-49.
[7]	陈雄. 裂解气压缩机轴位移升高原因分析及对策[J]. 乙烯工业, 2021, 33(2): 53-55.
[8]	游笑辉, 董亚龙, 王晨宇, 王俊杰, 代川. 裂解气压缩机注水系统优化 [J]. 乙烯工业, 2021, 33(2): 56-58.