裂解炉稀释蒸汽管道膨胀节故障原因分析及消缺措施

乙烯工业 ›› 2023, Vol. 35 ›› Issue (2): 54-56.

裂解炉稀释蒸汽管道膨胀节故障原因分析及消缺措施

任崇欣，余德江，王俊杰，倪涌，马俊

中国石油天然气股份有限公司独山子石化分公司，新疆独山子 833699

收稿日期:2022-06-10 修回日期:2023-02-18 出版日期:2023-06-25 发布日期:2023-07-11
作者简介:任崇欣，男，2012年毕业于辽宁石化化工大学化学工程与工艺专业，工学学士，主要从事工艺技术管理工作，高级工程师。

Fault Analysis and Defect Elimination Measures for Expansion Joints of Dilution Steam Pipelines in Cracking Furnace

Ren Chongxin, Yu Dejiang, Wang Junjie, Ni Yong, Ma Jun

PetroChina Dushanzi Petrochemical Company, Dushanzi, Xinjiang, P.C.833699

Received:2022-06-10 Revised:2023-02-18 Online:2023-06-25 Published:2023-07-11

摘要/Abstract

摘要：

独山子石化公司乙烯老区6号裂解炉在运行中通过横跨温度、炉管温度等工艺参数的差异，排查发现4组稀释蒸汽管道上的膨胀节波纹管过度拉伸，严重超出设计范围；同时，导流筒严重变形堵塞管道，不仅影响管道通量，若不能及时发现，膨胀节处可能发生断裂、物料泄漏的生产事故，严重影响装置的平稳运行。为彻底解决膨胀节对裂解炉运行的影响，通过对工艺管道应力的重新核算及增加部分弹簧吊架、支撑，将膨胀节更换为直管段，消除了裂解炉因膨胀节变形导致的运行隐患。

关键词: 乙烯装置 , 膨胀节 , 导流筒 , 应力变形 , 消缺措施

Abstract:

Based on the investigation of the differences in process parameters such as crossover temperature and furnace tube temperature during the operation of the No. 6 cracking furnace in the old area of PetroChina Dushanzi Petrochemical Company, it was found that the bellows of four expansion joints of diluent steam pipelines were overstretched and seriously exceeded the design scope. At the same time, the draft tube was seriously deformed and blocked the pipeline, which not only affected the flux of the pipelines, but also led to the fracture and material leakage at the expansion joints if it cannot be found in time, seriously affecting the smooth operation of the plant. In order to completely solve the influence of expansion joint on the operation of cracking furnace, the expansion joint was replaced by straight pipe section by re-calculating the stress of process pipelines and adding part of spring hanger and support, thus eliminating the hidden trouble caused by the deformation of expansion joint of cracking furnace.

Key words: ethylene plant, expansion joint, draft tube, stress deformation, defect elimination measure

任崇欣, 余德江, 王俊杰, 倪涌, 马俊. 裂解炉稀释蒸汽管道膨胀节故障原因分析及消缺措施[J]. 乙烯工业, 2023, 35(2): 54-56.

Ren Chongxin, Yu Dejiang, Wang Junjie, Ni Yong, Ma Jun. Fault Analysis and Defect Elimination Measures for Expansion Joints of Dilution Steam Pipelines in Cracking Furnace[J]. Ethylene Industry, 2023, 35(2): 54-56.

[1]	吴翔. 乙丙烷原料比例对乙烯装置深冷分离系统的影响[J]. 乙烯工业, 2023, 35(3): 1-4.
[2]	蒋鹏飞, 洪琨, 张乐, 沈光明, 赵聪. 乙烯装置近零排放快速开车流程优化[J]. 乙烯工业, 2023, 35(3): 5-12.
[3]	吕定军, 纪红兵. 乙烯装置脱甲烷塔开车问题分析及应对措施[J]. 乙烯工业, 2023, 35(2): 25-28.
[4]	吕卿廉, 葛文磊, 刘东, 刘二龙. 降低乙烯装置加工能耗提高双烯收率的措施[J]. 乙烯工业, 2023, 35(2): 62-64.
[5]	鲁卫国, 周召方. 乙烯装置低排放开停车技术特点分析[J]. 乙烯工业, 2022, 34(4): 15-19.
[6]	彭志荣. 乙烯装置低压甲烷氢流程优化改造[J]. 乙烯工业, 2022, 34(4): 20-22.
[7]	刘源波, 雷伟伟, 张锋刚. 丙烯产品中甲醇含量高的原因及处理方法[J]. 乙烯工业, 2022, 34(4): 26-29.
[8]	刘泽涵, 米孜拉夫·麦麦提, 洪琨, 郝飞, 李兆龙. 百万吨乙烯三机透平单试及联动试车过程问题及优化措施[J]. 乙烯工业, 2022, 34(4): 56-60.
[9]	刘亚朝. 乙烯装置Rundown工况的设置及其对制冷系统的影响 [J]. 乙烯工业, 2022, 34(3): 7-12.
[10]	谢明. 乙烯装置碱洗塔运行问题原因分析和对策[J]. 乙烯工业, 2022, 34(3): 13-16.
[11]	陈亚宽, 王超, 占少虎. 急冷油旋液分离系统附属静置器运行中的问题及改进措施[J]. 乙烯工业, 2021, 33(4): 28-32.
[12]	薛党臣. 浅析海外百万吨级乙烯装置管道材料量的估算方法[J]. 乙烯工业, 2021, 33(2): 12-15.