乙烯工业 ›› 2025, Vol. 37 ›› Issue (4): 7-9.

• 工业技术 • 上一篇    下一篇

丁二烯装置NMP溶剂中水含量的控制与优化

祖国英,李  冰,陈  刚,王建峰,高鹏达   

  1. 中国石油独山子石化分公司,新疆 独山子 833699
  • 收稿日期:2024-12-30 修回日期:2025-10-22 出版日期:2025-12-25 发布日期:2025-12-30
  • 作者简介:祖国英,男,2009年毕业于华东石油大学化学工程与工艺专业,现从事工艺技术管理工作,高级工程师。

Control and Optimization of Water Content in NMP Solvent during Operation of Butadiene Units

Zu Guoying, Li Bing,Chen Gang, Wang Jianfeng, Gao Pengda   

  1. PetroChina Dushanzi Petrochemical Company,Dushanzi, Xinjiang, P.C.833699
  • Received:2024-12-30 Revised:2025-10-22 Online:2025-12-25 Published:2025-12-30

摘要:

某石化公司35 kt/a丁二烯装置使用N-甲基吡咯烷酮作为萃取溶剂,在NMP方法生产丁二烯的工艺中,NMP中水含量的控制,对装置的正常生产起到至关重要的影响,水含量过高易造成溶剂选择性能变差、溶剂系统热源不足、主洗塔压差波动等危害,文中对丁二烯装置NMP溶剂中水含量的控制经验进行了总结。

关键词: 丁二烯 , NMP溶剂 , 水含量

Abstract:

The 35 kt/a butadiene unit of a petrochemical company uses N-methylpyrrolidone as the extraction solvent. In the NMP method for butadiene production, the control of water content in NMP plays a crucial role in the normal production of the unit. Excessive water content can easily cause poor solvent selection performance, insufficient heat source in the solvent system, and fluctuations in pressure difference in the main washing tower. This article summarizes the experience in controlling the water content in NMP solvent of the butadiene unit.

Key words: butadiene, NMP solvent, water content