裂解炉急冷系统管系的应力分析及工程应用

About journal

Ethylene Industry ›› 2025, Vol. 37 ›› Issue (2): 53-57.

• CRACKING FURNACE • Previous Articles Next Articles

Stress Analysis and Engineering Application of Risers and Downcomers for Ethylene Cracking Furnaces

Tang Wei.

Tianhua Institute of Chemical Machinery & Automation Co., Ltd，Lanzhou，Gansu, P.C.730060

Received:2024-07-16 Revised:2025-02-15 Online:2025-06-25 Published:2025-06-25
About author:唐蔚，男，2012年毕业于南京工业大学过程装备与控制工程专业，学士，从事裂解炉的燃烧系统和急冷系统的研发工作，高级工程师。

Abstract

Abstract:

As the pipes connecting steam drum and quench heat exchanger, risers and downcomers are an important part of the quench system for ethylene cracking furnace. In order to ensure the safe, stable and long-term operation of ethylene plant and the reliable use of quench system, it is necessary to carry out a reasonable design and stress analysis of the risers and downcomers. This article introduces the stress analysis process of risers and downcomers, and summarizes the problems and solutions encountered during stress analysis based on the specific example of a project.

Key words: ethylene cracking furnace, quench system, riser and downcomer, stress analysis

Tang Wei. .

Stress Analysis and Engineering Application of Risers and Downcomers for Ethylene Cracking Furnaces [J].Ethylene Industry, 2025, 37(2): 53-57.

[1]	Qi Minglu. Shortcomings and Improvement of Traditional Chemical Cleaning Scheme for Shutdown Treatment in Quench Zone during Overhaul of Ethylene Plant [J]. Ethylene Industry, 2025, 37(2): 6-14.
[2]	Wang Xiwang, Li Zhonghua, You Zhiheng, Jiang Liangxing, Yang Jinlu.. Analysis of Factors Influencing Long-term Operation of Quench System and the Optimization Measures [J]. Ethylene Industry, 2025, 37(2): 34-37.
[3]	Shen Zhen, Zhang Junwen. Piping Design for Ethylene Cracking Furnaces [J]. Petrochemical Design, 2025, 42(1): 54-58.
[4]	Fu Yanbo, Shi Xuna, Lu Duo. Stress Analysis and Optimization of Hydrogen-containing Gas Piping System in Furnace Reactor Area of Slurry-bed Residue Hydrocracking Unit [J]. Petrochemical Design, 2024, 41(2): 36-40.
[5]	Song Zhiqi, Ma Guomin, Ding Shaohui, Wu Liaosha, Xu Wenming. Capacity Expansion Schemes of Quench System in Ethylene Plant [J]. Ethylene Industry, 2024, 36(1): 28-32.
[6]	Zhang Lei, Luo Lingli, Li Zhonghua, Ren Chongxin, Lyu Xiaogang. Influence of Operating Mode of Five Operating Cracking Furnaces on Quench System and the Optimization Measures [J]. Ethylene Industry, 2024, 36(1): 37-41.
[7]	Gao Xiaolei. Standardized Transformation Schemes for SL-Ⅱ Ethylene Cracking Furnaces [J]. Ethylene Industry, 2023, 35(3): 52-56.
[8]	Wang Yu, Chen Sunyi. Stress Analysis of High ChromeNickel Alloy Cast Tube Sheets in Heaters [J]. Petro-chemical Equipment Technology, 2023, 44(2): 26-31.
[9]	Guo Shuping, Li Wei, Cui Jian. Stress Analysis of Vertical Tank Opening under External Nozzle Load [J]. Petro-chemical Equipment Technology, 2023, 44(1): 21-26.
[10]	Zhang Mingbo. Stress Analysis of the Opening of Self-supporting Steel Chimney [J]. Petrochemical Design, 2022, 39(3): 13-15.
[11]	Zhong Dan. Piping Design and Equipment Layout of Ethylene Cracking Furnace [J]. Petrochemical Design, 2022, 39(2): 28-32.
[12]	Yu Guopeng. Stress Analysis of Ultra-high Pressure Steam Pipeline [J]. Petrochemical Design, 2022, 39(2): 46-48.
[13]	Zheng Bin, Wang Nini. Stress Analysis of Tower and Vertical Thermosyphon Reboiler [J]. Petrochemical Design, 2021, 38(4): 45-49.
[14]	Zhao Mingrui. Discussion on Energy Consumption of Quench System in Ethylene Plant with Light Raw Material [J]. Ethylene Industry, 2021, 33(3): 21-25.
[15]	Huang Yifeng. Piping Design of Ethylene Cracking Furnace [J]. Petrochemical Design, 2021, 38(2): 54-58.

Stress Analysis and Engineering Application of Risers and Downcomers for Ethylene Cracking Furnaces

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0