炉管自动测温与结焦智能诊断系统在裂解炉上的应用

乙烯工业 ›› 2018, Vol. 30 ›› Issue (4): 57-59.

炉管自动测温与结焦智能诊断系统在裂解炉上的应用

吴家伟¹，谭伟洪¹，崔俊华²,邹奇海¹

1 中科(广东)炼化有限公司，广东湛江 524076；
2 中国石油化工股份有限公司茂名分公司化工分部，广东茂名 525000

收稿日期:2017-09-19 接受日期:2018-07-15 出版日期:2018-12-25 发布日期:2018-12-30
作者简介:吴家伟，男，2016年毕业于国家开放大学行政管理专业，主要从事乙烯裂解工艺管理工作，高级技师。

Application of Automatic Temperature Measurement and Intelligent Coking Diagnosis System in Cracking Furnace

Wu Jiawei¹,Tan Weihong¹,Cui Junhua²,Zou Qihai²

1. Zhongke (Guangdong) Refinery & Petrochemical Company Limited, Zhanjiang, Guangdong, P.C.524076；
2. SINOPEC Maoming Company, Maoming, Guangdong, P.C.525000

Received:2017-09-19 Accepted:2018-07-15 Online:2018-12-25 Published:2018-12-30

摘要/Abstract

摘要： 茂名石化和广东石油化工学院共同研制的裂解炉管自动测温与结焦智能诊断系统，应用于茂名乙烯H-115炉，实现了炉管外壁温度的准确测量。通过对策略温度进行收集、诊断分析能够实现超温炉管的早期发现和预警，可替代人工手持测温。

关键词: 裂解炉管温度, 自动测温, 超温预警, 智能诊断

Abstract: The automatic temperature measurement and intelligent coking diagnosis system for furnace tube jointly developed by SINOPEC Maoming Company and Guangdong University of Petrochemical Technology was applied in the H-115 cracking furnace in Maoming, and the accurate measurement of the outer wall temperature of furnace tubes were achieved. Through the collection, diagnosis and analysis of strategy temperatures, the early detection and early warning of over temperature furnace tube can be achieved, and the manual temperature measurement can be replaced.

Key words: temperature of cracking furnace tube；automatic temperature measurement, over temperature warning, intelligent diagnosis

吴家伟，谭伟洪，崔俊华,邹奇海. 炉管自动测温与结焦智能诊断系统在裂解炉上的应用[J]. 乙烯工业, 2018, 30(4): 57-59.

Wu Jiawei,Tan Weihong,Cui Junhua,Zou Qihai. Application of Automatic Temperature Measurement and Intelligent Coking Diagnosis System in Cracking Furnace[J]. Ethylene Industry, 2018, 30(4): 57-59.