,revamping of post depentanizer,tray blocking,C4 yield ,"/> <b>茂名乙烯装置脱丁烷塔堵塞析因分析及对策</b>

乙烯工业 ›› 2021, Vol. 33 ›› Issue (1): 23-28.

• 工业技术 • 上一篇    下一篇

茂名乙烯装置脱丁烷塔堵塞析因分析及对策

    

  1. 中国石油化工股份有限公司茂名分公司,广东 茂名 525000
  • 出版日期:2021-03-25 发布日期:2021-03-23
  • 作者简介:刘茂,男,2003年毕业于茂名学院石油化工工艺专业,主要从事乙烯装置生产和技术管理工作,工程师。

Improvement Measures for Blocking of Debutanizer in the Ethylene Plant in Maoming

Liu Mao.   

  1. SINOPEC Maoming Company, Maoming, Guangdong, P.C.525000
  • Online:2021-03-25 Published:2021-03-23

摘要:

茂名乙烯2号裂解装置脱丁烷塔长时间运行,进料中的不饱和烯烃组分发生聚合结垢堵塞塔盘,降低了脱丁烷塔的分离效果,导致脱丁烷塔塔釜中碳四损失升高,针对茂名乙烯脱丁烷塔碳四损失严重的问题,利用闲置的2号裂解汽油加氢装置后脱戊烷塔对其进行了流程改造,将脱丁烷塔与后脱戊烷塔串联操作,脱丁烷塔塔釜的物料采出作为脱戊烷塔进料,进一步分离回收碳四,极大降低了高附加值产品碳四的损失率,增加经济效益。

关键词: 后脱戊烷塔改造 , 塔盘堵塞 , 碳四收率

Abstract:

The debutanizer of No.2 cracking unit of the ethylene plant in Maoming had been operated for a long time. The unsaturated olefins in the feed polymerized at high temperature and blocked the trays, reducing the separation effect of the debutanizer. As a result, the loss rate of C4 in the bottom of debutanizer increased. To solve the high C4 loss in the debutanizer, the process flow was revamped by utilizing the idle post depentanizer of the No.2 cracking gasoline hydrogenation unit. The debutanizer and the post depentanizer were operated in series, and the material from the bottom of the debutanizer was used as the feed to the depentanizer to further separate and recover C4, thus greatly reducing the loss rate of high value-added C4 products and improving the economic benefit.

Key words:  ')">

 , revamping of post depentanizer, tray blocking, C4 yield