[1] X.-W Zheng.Status of Using of Ethylene Pyrolysis Furnace Tubes in China[J]. Press Vessel Technol, 2013(30): 45–52.
[2] D.Jakobi,R.Gommans.Typical failures in pyrolysis coils for ethylene cracking[J].Mater Corros, 2003, 54(11): 881–887.
[3] Z.Han, G.Xie, L.Wang,et al.Material degradation and embrittlement evaluation of ethylene cracking furnace tubes after long term service[J]. Eng Fail Anal, 2019(97):568–578.
[4] A.Reihani, S.A.Razavi, E.Abbasi,et al. Failure analysis of welded radiant tubes made of cast heat-resisting steel[J]. Journal of Failure Analysis and Prevention, 2013, 13(6): 658–665
[5] K.S.Guan, F.Xu, Z.W.Wang,et al.Failure analysis of hot corrosion of weldments in ethylene cracking tubes[J]. Eng. Fail Anal, 2005, 12(1): 1–12.
[6] V.Tari, A.Najafizadeh, M.H.Aghaei,et al. Failure Analysis of Ethylene Cracking Tube[J]. Journal of Failure Analysis and Prevention, 2009, 9(4): 316–322.
[7] T.Chen, X.Chen, C.Liu,et al. Classification of Primary Carbides in Ethylene Pyrolysis Furnace Tubes and the Effects on High Temperature Rupture Performance[J]. Journal Mech. Eng, 2018, 54(8): 109–116.
[8] X.M.Lian, X.D. Chen, T.Chen,et al.Carburization Analysis of Ethylene Pyrolysis Furnace Tubes after Service[J]. Procedia Engineering, 2015(130): 685–692.
[9] J. E.C.Lopez, M.P.Arenas, C. J. Pacheco,et al.Development of a magnetic sensor for detection of moderate carburization damages in heat-resistant HP-Nb tubes of steam reforming furnaces[J]. J. Mater Res Technol, 2018, 7(3): 371–375.
[10] I.C.Silva, L.L.Silva, R.S.Silva,et al. Carburization of ethylene pyrolysis tubes determined by magnetic measurements and genetic algorithm[J]. Scr. Mater, 2007, 56(4): 317–320.
[11] K.J.Stevens, A. J. Tack, C.W.Thomas,et al.Through-wall carburization detection in ethylene pyrolysis tubes[J]. Journal of physics D, 2001, 34(5): 814.
[12] K.Hasegawa, T.Oikawa, N.Kasai.Development of an eddy current inspection technique with surface magnetization to evaluate the carburization thickness of ethylene pyrolysis furnace tubes[J]. Journal of Nondestructive Evaluation, 2012, 31(4): 349–356.
[13] N.Kasai, S.Ogawa, T.Oikawa,et al.Detection of carburization in ethylene pyrolysis furnace tubes by a C core probe with magnetization[J] J.Nondestruct Eval,2010, 29(3): 175–180.
[14] T.Chen, X.Chen, J.Chen,et al.Magnetic Method for Rapid Detection of Carburization Degree of Fe–Cr–Ni Series High-Temperature Heat-Resistant Alloy[J]. J. Press Vessel Technol Trans ASME, 2022, 144(5): 1–5.
[15] T.Tiyawongsakul.Maintenance and Reliability Carburization inspection robots for radiant tubes inside ethylene cracking furnaces[N]. Hydrocarbon processing, 2017.
[16] S.H.Khodamorad,D.F.Haghshenas.Inspection of carburization and ovalness in ethylene cracking tubes by using a semi-robot[J]. Eng Fail Anal,2012(25): 81–88.
|