乙烯工业 ›› 2019, Vol. 31 ›› Issue (2): 1-5.

• 综述 •    下一篇

裂解汽油加氢技术的进展

王鑫泉   

  1. 中国石化工程建设有限公司,北京，100101
  • 收稿日期:2019-04-05 出版日期:2019-06-25 发布日期:2019-06-28
  • 作者简介:王鑫泉，男，1967年毕业于清华大学同位素分离专业，从事石油化工设计工作50多年，教授级高级工程师。

Progress in Pyrolysis Gasoline Hydrogenation Technology

Wang Xinquan   

  1. SINOPEC Engineering Incorporation, Beijing, P.C.100101
  • Received:2019-04-05 Online:2019-06-25 Published:2019-06-28

赞

摘要： 介绍了传统的两类裂解汽油加氢流程：全馏分加氢和中心馏分加氢。并针对国内主要采用的中心馏分加氢技术，详细叙述了中国石化工程建设有限公司(SEI)在裂解汽油中心馏分加氢流程中的多处技术改进，如改变原料进料方式、换热流程优化、降低回流比、采用高效换热器以及二段加氢的冷热高分技术。通过工艺改进，使裂解汽油装置的能耗下降了约40％。另外还简要介绍了裂解汽油加氢工艺流程的拓展，如裂解汽油抽提苯乙烯技术，以及裂解汽油加氢工艺流程的延伸，如增产BTX的APU（先进的工艺单元）技术。

关键词: 裂解汽油加氢 ,  , 技术改进 ,  , 流程延伸

Abstract:

This paper introduces two traditional pyrolysis gasoline hydrogenation processes, i.e. full range gasoline hydrogenation and heart cut gasoline hydrogenation, and discusses in detail the technological improvements in the process flow of heart cut pyrolysis gasoline hydrogenation by SINOPEC Engineering Incorporation, including changing the feeding mode, optimizing the heat exchange process, reducing the reflux ratio and adopting high efficiency heat exchanger and cold and hot high pressure separation technology with two-stage hydrogenation. Through process improvement, the energy consumption of pyrolysis gasoline unit is reduced by about 40%. The expansion of pyrolysis gasoline hydrogenation process, such as the extraction of styrene from pyrolysis gasoline, and the extension of pyrolysis gasoline hydrogenation process, such as the APU (advanced process unit) technology for increasing BTX production, are briefly introduced.

Key words: pyrolysis gasoline hydrogenation, technological improvement, process extension

版权所有 © 《乙烯工业》编辑部
地址：北京市朝阳区安慧北里安园21号　　邮政编码：100101
电话： 010-84876209；84878482　　E-mail: yxgy.sei@sinopec.com
本系统由北京玛格泰克科技发展有限公司设计开发